Αναζήτηση

-7%

Clorofilla CREE 3070 250

Original price was: 876.50€.Current price is: 817.00€.

Clorofilla CREE 3070 250

Characteristics:

It uses the latest lighting technology including American CREE CXB COBs and German Osram SSL LEDs designed specifically for horticultural lighting.
Two ON / OFF switches to easily meet the different lighting requirements required by plants at each growth stage.
The patented reflector design guarantees an excellent PAR output and proper lighting coverage.
Carefully selected spectra that provide the solar spectrum required by the plants.
Perfect heat management, cool to the touch.
With junction blocks to easily connect the lights and mount them as desired.

 

Instructions:

Designed exclusively for indoor use, do not place near humidifiers or in rooms with humidity above 80%
Place the lights in a fixed position, make sure that the lamps and a distance of 2.5cm from the top do not block the air ducts. This will ensure plenty of air flow for maximum heat dissipation.
Use only a properly grounded electrical outlet.
For the initial lighting, place the light 25-50cm from the top of the shell. The layout will vary depending on the size of the plant, the strain and the species. Additional lighting solutions such as T5 or HPS can be used and would ideally be 40-65cm from the dome.
Do not look directly at LEDs when the unit is powered without proper protection.

 

Special characteristics:

Power consumption: 250W
Dimensions (M * W * Y): 900 x 200 x 75 mm
Packaging (M * W * Y) / box: 990 x 265 x 150 mm
Weight: 8.5 KG
Daisy Chain: 3 points (MAX)
AC Input Voltage: AC100V ~ 265V / 50-60Hz
Overheating protection
Power factor over 95%
Color spectrum / Color ratio: AC100V ~ 265V / 50-60Hz
True Watts LEDs: COB (50W) / PCS, Surround LEDs (30W) / Module
Light Source: CREE CXB3070 COB; Osram SSL80 Surround LED
Total LED: CXB3070 COB / 3PCS Osram SSL / 36PCS
Switch: Dual Controller Switch, CH1: COB, CH2: Surround LEDs
PCB: Metal PCB (aluminum) 2.0MM
Thermal conductivity: 2.0 w / m.k
Certification: CE, ROHS

 

See more in the video:

Phytolite CLOROFILLA CREE 3070 Line – ENG

 

 

Clorofilla CREE 3070 250

2050 µmol measured in the center (with lenses 50 cm apart).

A model specially designed to give the best performance in rectangular crop boxes or an array in professional crops. The recommended area is from 120 × 60 to 150 × 80 depending on the type of plants being grown and the use or not of the lenses.

The Clorofilla CREE 3070 250 mounts three CXB 3070 COBs surrounded by 12 Osram SLL80 3W emitters that optimize emissions by enhancing them at the most important frequencies for growth and vegetation development.

The COB lens can be removed to significantly increase the emission angle from 60 ° to 120 °.

High PPDF broadcast.
Full range of CREE 3000K + Osram Oslon Color Mix.
Full cycle: from vegetation to flowering.
3 channels (Use only the Osram ring (Color Mix) for vegetation and the first few weeks. Both channels for vegetation and flowering. Use COB only for maintenance plants and mother plants.)
Industrial quality.
High penetration and concentration light with 60 ° lenses. Remove lenses and mount lenses without lenses for 120 ° beam angle (Sea of ​​Green, SCROG, small plants, clones).
5 YEARS WARRANTY

Available on backorder

Additional information

Weight 1 kg
Brand

Watt

Growing Stage

Lamp Type

Coverage Area

Spectrum

Clorofilla CREE 3070 250

Characteristics:

It uses the latest lighting technology including American CREE CXB COBs and German Osram SSL LEDs designed specifically for horticultural lighting.
Two ON / OFF switches to easily meet the different lighting requirements required by plants at each growth stage.
The patented reflector design guarantees an excellent PAR output and proper lighting coverage.
Carefully selected spectra that provide the solar spectrum required by the plants.
Perfect heat management, cool to the touch.
With junction blocks to easily connect the lights and mount them as desired.

 

Instructions:

Designed exclusively for indoor use, do not place near humidifiers or in rooms with humidity above 80%
Place the lights in a fixed position, make sure that the lamps and a distance of 2.5cm from the top do not block the air ducts. This will ensure plenty of air flow for maximum heat dissipation.
Use only a properly grounded electrical outlet.
For the initial lighting, place the light 25-50cm from the top of the shell. The layout will vary depending on the size of the plant, the strain and the species. Additional lighting solutions such as T5 or HPS can be used and would ideally be 40-65cm from the dome.
Do not look directly at LEDs when the unit is powered without proper protection.

 

Special characteristics:

Power consumption: 250W
Dimensions (M * W * Y): 900 x 200 x 75 mm
Packaging (M * W * Y) / box: 990 x 265 x 150 mm
Weight: 8.5 KG
Daisy Chain: 3 points (MAX)
AC Input Voltage: AC100V ~ 265V / 50-60Hz
Overheating protection
Power factor over 95%
Color spectrum / Color ratio: AC100V ~ 265V / 50-60Hz
True Watts LEDs: COB (50W) / PCS, Surround LEDs (30W) / Module
Light Source: CREE CXB3070 COB; Osram SSL80 Surround LED
Total LED: CXB3070 COB / 3PCS Osram SSL / 36PCS
Switch: Dual Controller Switch, CH1: COB, CH2: Surround LEDs
PCB: Metal PCB (aluminum) 2.0MM
Thermal conductivity: 2.0 w / m.k
Certification: CE, ROHS

 

See more in the video:

Phytolite CLOROFILLA CREE 3070 Line – ENG

 

 

Reviews

There are no reviews yet.

Be the first to review “Clorofilla CREE 3070 250”
Products were successfully added to the cart