Lumatek ZEUS 1000W Xtreme PPFD CO2 LED

Lumatek ZEUS 1000W Xtreme PPFD CO2 LED

LUMATEK has just reached a new level in LED Indoor lighting. The most powerful Plant growing LED.

Raising the reference limit for garden lighting higher than ever. Lumatek introduces to manufacturers the most powerful light on the market, the Zeus 1000W Xtreme PPFD CO2 LED.

Designed for coverage 1.5 × 1.5m with Complementary CO2 for optimal performance and results.

The brightest just got brighter.

The highest specification Lumatek Zeus 1000W Xtreme PPFD CO2 LED is a linear rod attachment that produces extremely high levels of PPF 2925 olmol / s and a photon efficiency (attachment efficiency) of 2.9 μmol / J. Pioneers of modular, magnetic LED light bar design. With advances in technology and performance, high quality LED lighting is now the most reliable option that offers significant investment returns to growers.

Lumatek solutions with full spectrum LED balance the quality of light (spectra) with the amount of light (intensity and duration) ensuring a uniform distribution of light.

Zeus 1000W Xtreme PPFD CO2 produces extremely high levels of light intensity that require the use of additional CO2 for those planning to grow in 1.5 * 1.5m growing areas with short distances from the top of the plants to the light.

Carbon dioxide (CO2) supply

The use of CO2 with this component is not mandatory, but to work without it, then we recommend a greater distance of the plants from the light, ensuring optimal PPFD levels depending on the stage of growth.

Using the latter method, the expected optimal coverage area reaches 1.8 × 1.8 m but with lower PPFD intensity levels.

Supplementary use of carbon dioxide (CO2) in your controlled environment can significantly improve your crop yield if used properly.

In general a good rule is that when you exceed PPFD levels of 1000 μmol / s / m2, you should be 1: 1 with CO2 PPM – up to 1500. Thus, at the maximum PPFD = 1500 μmol / s / m2, CO2 would be 1500 PPM (a little lower, 1400 PPM may be the safest to start).

The new Zeus range is built using high quality Lumatek and state-of-the-art Lumileds and Osram drivers from Lumileds and Osram, creating a full-spectrum light source ideal for vegetation and flowering cycles.

Another new feature of this line is the Clear Glue coverage technology on the LED bars. As a result:

• 99% higher light transmission without light loss,
• extended diode life,
• extra corrosion resistance and high waterproof IP65.

For basic maintenance, simply clean the rods with a damp cotton swab For different varieties, propagation and germination times, Zeus can be adapted without losing its effectiveness. The high efficiency and low power LED configuration with 10 LED rods reduces the temperature of the LEDs by increasing the output and improving light maintenance.

The Zeus accessory can also be controlled externally with a Lumatek digital lighting controller (Digital Panel Plus 2.0)

• light timing, automatic reduction (1% increments),
• temperature safety control,
• Sunrise & Sunset function for up to 100 luminaires per controller.

Compatibility of universal control systems

Lumatek Zeus LEDs can be fully controlled with the Lumatek Digital Panel Plus 2.0 or any other control system that uses an output signal of 0-10V. Even if your Universal Controller has an RJ port interface, you can still use the LEDs using an RJ signal converter control adapter at 0-10V

Specifications:

EFFICIENCY 2.9 μmol / J PPF 2925μmol / s
POWER SUPPLY VOLTAGE 220-240V, 50-60Hz
POWER CONSUMPTION 1025W
IMPRESS 1.5×1.5m using CO2, 1.8×1.8m
WATERPROOF IP65
LIFE 60,000 hours
LIGHT DISTRIBUTION 120 °
LIGHT SOURCE Higher specifications Osram and Lumileds Diodes
DIMMABLE OFF-25% -50% -75% -100% with 0-10V Light Dimmer

WEIGHT 18 kg
DIMENSIONS 1181.2x1091x105.7mm
Full Spectrum

Includes:

• 10 x Lumatek 100W Pro 2.9 Full-Spectrum Magnet Light Bars
• 1 x Lumatek 1000W Xtreme Pro Driver with Connecting Cables
• 1 x LED Structure with cable
• 1 x 0-10V Light Dimmer + Velcro
• 2 x Metal Cable Hangers
• 1 x Manual